Check out Sandi’s 2B post! And I’m sorry this took so god-awful long to get posted – I had a week of being really, really depressed and apathetic. It was really hard to convince myself to do anything this week, even get out of bed. I kept trying to work on this, but everything was just in a state of “ugh” and “meh”.
On Sunday, you all got a brief peek in my head – apologies again… I know it can be a pretty scary place. LOL!
Anyway, today is a little bit more of the same. Today, I’ll walk you through some color theory, as well as how I select fabrics for a quilt. I’m actually going to provide a couple of examples. Now, obviously the fabrics are an integral part of designing a quilt, so you’ll get some insight as to the internal monologue that goes on as I debate fabrics and their potential design use. But first…
I know… Just the sight of a color wheel probably dredges up some memories of having to create one of these things in an art class long ago. I know I did.
But why is this important? Because every time you put a quilt together, you are a designer, and as a designer, there are some basics to be familiar with. Color can evoke so much emotion… Why else would we say we’re feeling ‘blue’ when we feel sad? Or that we’re ‘seeing red’ when we’re angry.
Color can be an effective communications tool, if you choose to utilize it. I’m not saying it’s wrong or bad to pick a color just because you like it. There is absolutely nothing wrong with that, and it is a completely valid color selection method. I’m just here to open a couple of doors for you. And, honestly, I’m just skimming the surface here… Entire books have been dedicated to this subject.
The Primary Colors we all know: red, blue, yellow. These are the simplest hues, and cannot be broken down into other colors – all colors on the color wheel are mixed from the primary colors. The Secondary Colors are violet, orange and green – they are the result of an an even mix of two of the primary colors, and also form a triangle. Tertiary Colors are the in-between colors, yellow-green, red-violent. They’re created by mixing a Primary Color and a Secondary Color.
Complementary Colors are the colors that are directly across from each other, like red and green, yellow and purple. Using these colors together provide a lot of pop, because there’s extreme contrast. If you want something to stand out, use complementary colors.
Analogous Colors are those colors that are next to each other on the wheel: red, red-orange, yellow. Monochromatic would be another way of saying this. It’s easy to match in this grouping.
Warm Colors are the reds, oranges and yellow on the color wheel. Think summer and fire, the sun and baking. Cool Colors are green, blue and violet. Think winter and ice, rain and sleet.
Neutral Colors are your whites, creams, browns, and blacks, and grays.
Tints are pure colors mixed with white. These, naturally, get lighter with more white. Shades are pure colors mixed with black. These become darker.
So, why does any of this matter? Because color interaction is cool and fun to play with! (The wanna-be graphic designer in me gets a little giddy occasionally.) Knowing how the different colors interact will open a ton of possibilities for you. Take a look at this, because I know I’m going to bork the actual explanation:
For some books on color theory and better explanation’s on how color and quilts work, I’d highly suggest Joen Wolfrom. She writes from a quilter’s perspective, and has developed the 3-in-1 Color Tool to help purchasing fabrics easier. If you don’t mind textbooks, Understanding Color: An Introduction for Designers by Linda Holtzschue is a good one.
And now, for the fun part! Actual fabric pics! I’ll walk you through picking colors/fabrics from an inspiration fabric and picking colors for diversity.
I’m a little weird, but you guys knew that already 😉 I joke, and say that I work my way in from the outside of a quilt, meaning that I start with my border print and go from there. It’s really not so much joking, though. It really is how I work. So, let’s start with this particular bit of pretty:
Now, I actually like this large scale print for a couple of different reasons. I love the sensation of movement it has, and the updated, tiled paisleys scattered on it. It’s deceptively simple, because of the large amounts of background showing. I like that there are actually quite a few colors in the print, but they’re used very effectively together: white, cream, baby blue, gun-metal gray, gray-blue, brown, and tan. However…
I also like this print because it encompasses all the values I need for a quilt, from light to dark, which makes it an excellent starting point for mixing and matching.
Kind of freaky how much thought goes into just one fabric selection, isn’t it? This is why color selection is so difficult! It’s not just your tastes – it how the colors mix together to achieve the affect you as the designer are going for.
Let’s add something else:
This middle print I actually shopped from Sandi’s stash – it’s nice to have friends who are so generous with their fabric! I like how this addition pulls that almost Prussian blue out of the focal print (hereafter referred to as FP, because I’m tired of typing that!), while giving me a middle ground in value. It also mimics the movement of the FP, while appearing more sedate because the background color is so harmonious.
Let’s add some more value differences:
Really happy so far – there’s good differences in scale and value. I’m moving from darkest dark to lightest light with little effort. I’m still not happy though… I’m completely skipping over the creams and browns.
Here, I’ve added some much needed variety. I’m really digging the structure of the far right print against the free motion of the FP, so that’s good. It also draws in the pale blue that’s present. I’m not too keen on the white tone on tone present. It looks too washed out. That will probably go, though I’ll leave it for the moment.
On the whole, I’m really happy with this grouping of fabrics. The only thing I feel is missing at this point is a blue solid or tone on tone to match the columbine blue flower petals. Looking at the grouping I have, I’d like to bring in an oatmeal color tone on tone or solid and that blue. Unfortunately, I don’t have those on hand, but I think you guys get the idea. This is why I buy large scale prints.
STARTING WITH A LIMITED PALETTE
I know a lot of you enjoy working with single fabric lines. I’ve never before purchased the entirety of a fabric line, even in a pre-cut. The closest I got was to buy a number of the prints from the Exclusively Quilters Eclipse line:
Gorgeous, right? Honestly, this is the one fabric line that made my heart skip a beat when I saw it on the bolt. And I know this totally violates my stance on sunshine yellow, but look at it!!
So, anyway, now that I’m done drooling anew (even though I bought this stuff last summer)… This fabric is wonderful for this exercise because the palette is so limited. We’ve got white, black, a couple shades of gray, and yellow. However…
There’s really only two scales represented here: large and medium. But wait! What about the one on the right? Look at the repeat a little closer: It’s almost the same size as the sunflower in the middle print, roughly 4″ square. The only thing that saves it from tippling over into being large scale is that it’s drawn with thin lines.
But anyway, let’s take a look at values, now that we’ve established that I’ll need some small scale prints:
I know! It was pretty obvious right from the beginning that we had a dark dark (right print), and a light light (middle print). The print on the left is a little hard to classify, because of the lighter colors on the background, but because of the way it’s likely to show up when cut, I’d drop it in the light category.
Okay. So now what?
Now we need some diversity. Just three fabrics makes for a super dull quilt. Looking at the three prints, I’m seeing a lot of curves. Let’s change things up a little:
I like this gray on gray stripe with the original fabrics quite a bit. It brings some structure to the grouping. But you know what? It still needs something else…
Since I’m working from my stash for this exercise, I’m extremely limited in the number of yellow fabrics I have to work with, but I’m also not sure at this point that I would do a lot of cutting into the yellow floral print. I already know that I’m not going to fussy cut this stuff – I’m far too lazy for that. Besides, if I fussy cut, I lose that glorious yellow, and I want to preserve as much of that as I can. I’m thinking that it would be nice as an inner border – but that’s a step for the design phase!
No green, because acid and lime green are really what I buy, and there’s not enough value difference, though I do love the contrast of the squares of the middle fabric against the scrolls of the main fabrics. If all else fails, then I ‘ll attempt to pull out the dark shades of teal-green that are in that fabric. Same story with orange – just not enough value difference, and orange is too close on the color wheel to make me happy. Red shows some promise, but then the gray, white and black are overwhelmed, not showcased alongside the red and yellow.
So, considering my stash at this point, I’m left with aquas and magentas.
Okay, so my magenta stash sucks, because I’ve been buying a lot of softer pinks, which is just odd for me. Still… The top right, basket weave print is cool, but there’s too much white. I really like the very straight movement that the top left print gives, and it gives me a number of pinks to work with. The bottom ‘magenta’ leans too much to purple, and has too much gray in it.
Magenta’s out, for the moment. Lets take a look at aquas:
Hmmm… My first impression is that I’m getting rid of the large scale aqua and white print on the left. The print is too distracting and doesn’t harmonize with the movement I’ve already got going on. Plus, it’s another large scale print, and I’ve got plenty of that happening right now.
Let’s try adding something darker:
Right idea, wrong shade. You can see how much gray is in that right hand print. It’s drawing the eye, but not in a good way. Wrong quilt for this deep, grayed down teal.
Now we’re getting somewhere… The middle scroll like print would fill in my need for another mid-scale print, while serving as the dark for the aquas. It also harmonizes the left hand print, which is a perfect small scale print. I like the hint of dark in the third print in the top row, but it’s also a ‘reads as solid’, which will give the viewer a place to rest their eyes. The far right print, unfortunately, also suffers from wrong shade syndrome.
And look what I found while I was digging! I knew I had that yellow print in the top left corner somewhere – it got buried in the wrong pile. But I’m happy.. I can bring more yellow in, and this yellow is so clear and clean that I would want to match it exactly – and that’s one of the few instances that you’ll find me going for an exact match. But now I need more value contrast:
Much happier! Although, I’ll be removing the more graphic print, and going with the two on the right.
One of these days, I’ll make quilts out of these two examples, and link you back to this. D’oh! I just added two more projects to the to-do list.
Hopefully, this was helpful. Again, so, so sorry for the delay. I’ll be making a concentrated effort to be on task after this.